Upgrading FileMaker Pro from a Trial Version

FileMaker Pro

So over the weekend I needed to install FileMaker Pro 11 to a customer’s new computer, unfortunately they had misplaced the CD, but total disaster was averted as they had emailed me the serial number when I had first installed FileMaker for them on the old computer.

So my main problem was how to locate a copy of the software so I could install it. I thought this would be relatively simple as I had a .cdr copy of the installation disk stored on one of my hard drives. So I dropboxed it and gave it a couple of hours before I returned.

On my return I discovered how difficult it is to get Windows 7 to deal with certain file types. So .cdr was out, .iso was is. I used one of my customer’s Macs to run the conversion and dropboxed it back to the new PC. Ah, but Windows 7 can’t automatically mount an .iso.

So off to google, found a great little program called PowerISO which will allow you to mount a .iso and more importantly, will do it for free. (Mind you’ll have to note that it created CD Drive mapped to D: which caused us quite a bit of confusion later on…)

So once I had my .iso of FileMaker created and mounted, I discovered to my irritation that I could only find the .mkpg and no .exe. Oh where oh where was the .exe? Despite searching high and low I couldn’t for the life of me find it.

So it was back to the drawing board. And then it occurred to me why not just install the trial version and upgrade it? So off it was to filemakertrial.com to download the Windows trial version. Ten minutes later I had the copy in the downloads folder and ran the installer.

But where to upgrade the trial to full version? Oh wait there is no simple way to do it? Really FileMaker? You couldn’t make it a little easier than buying the full version, downloading it,  uninstalling the trial and re-installing the full copy?

I was sure that there must be an easier way. Especially as I already had a licence but simply no available copy of the Windows version of FileMaker. And I was right. Although FileMaker definitely did not make it easy to find.

So here are the instructions you’ll need: “Converting FileMaker Pro Trial” but remember that you’ll have to uninstall the trial version first and if you need to install more than one copy you’ll have to change the serial number each time before running the setup.exe

Other than that the only thing I think worth pointing out is that I could have downloaded and installed a cracked version of the software in a fraction of the time it took me to figure this out and that is largely due to the truly atrocious FileMaker site search.

Filed under: FilemakerTagged with: , , ,